PA6 ST811HS BK038 Zytel  物性表: 

流變性能(Rheological properties) dry / cond 單位(Unit) 測試標準(Test Standard)

ISO數據

成型收縮(Molding shrinkage) (parallel) 0.9 / * % ISO 294-4, 2577

成型收縮(Molding shrinkage) (normal) 1.4 / * % ISO 294-4, 2577

機械性能(機械性能(Mechanical properties)) dry / cond 單位(Unit) 測試標準(Test Standard)

ISO數據

拉伸模量(Tensile Modulus) 850 / - MPa ISO 527-1/-2

斷裂拉伸應變(Nominal strain at break) >50 / - % ISO 527-1/-2

破壞時應變(Stress at break) 44 / - MPa ISO 527-1/-2

破壞時應變(Strain at break) >50 / - % ISO 527-1/-2

簡支梁沖擊強度(Charpy impact strength) (+23°C) N / - kJ/m² ISO 179/1eU

簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C) 80 / - kJ/m² ISO 179/1eA

彎曲彈性模量(Flexural modulus) (23°C) 850 / - MPa ISO 178

懸臂梁式?jīng)_擊切口 (23°C) 65 / - kJ/m² ISO 180/1A

懸臂梁式?jīng)_擊切口 13 / - kJ/m² ISO 180/1A

溫度(Temperature) -40 °C ISO 180/1A

懸臂梁式?jīng)_擊無切口(Izod Impact unnotched) (23°C) N kJ/m² ISO 180/1U

熱性能(熱性能(Thermal properties)) dry / cond 單位(Unit) 測試標準(Test Standard)

ISO數據

熔化溫度(熔化溫度(Melting temperature)) (10°C/min) 218 / * °C ISO 11357-1/-3

溫度負荷變形(Temp. of deflection under load) (1.80 MPa) 40 / * °C ISO 75-1/-2

溫度負荷變形(Temp. of deflection under load) (0.45 MPa) 85 / * °C ISO 75-1/-2

COEFF線性熱(Coeff. of linear therm. expansion) (parallel) 130 / * E-6/K ISO 11359-1/-2

COEFF線性熱(Coeff. of linear therm. expansion) (normal) 140 / * E-6/K ISO 11359-1/-2

其他屬性(Other properties) dry / cond 單位(Unit) 測試標準(Test Standard)